DHR15 Powered LoudspeakerThe DHR15 is a 2-way bi-amp powered loudspeaker equipped with a 15-inch woofer and a 1.4-inch HF driver, perfect for use as a main speaker. Combining a 1000W amplifier and high-performance DSP with the same plywood construction found on Yamaha’s high-end DZR Series, the DHR15 offers best-in-class sound quality and durability.Featuring a plywood cabinet that delivers a clear sound with minimal vibrationPlywood enclosure with a polyurea coating for a robust, scratch resistant surfaceCompact size despite the 15-inch LF driver that provides excellent low frequency responseDual-angle pole sockets offer both 0° or a -7° down tiltRigging points for use with eye boltsProprietary FIR-X™ tuning, provides FIR filtering and corrective EQ, minimizing phase distortionGeneral specifications Speaker type2-way, Bi-amped Powered Speaker, Bass-reflexFrequency range (-10dB)44 Hz - 20 kHzCoverage areaH90 x V60Crossover1.8 kHz: FIR-X tuning™ (linear phase FIR filter)Maximum Output Level (Measured peak, IEC noise@1m)131 dB SPLComponents LFDiameter: 10" cone, Voice Coil: 2", Magnet: FerriteHFDiaphragm: 1.4", Type: 1" throat compression driver, Magnet: FerriteAmplifier classClass-DPower rating Dynamic700 W (LF: 500 W, HF: 200 W) *1Continuous465 W (LF: 400 W, HF: 65 W)CoolingFan cooling, 4 speedsPower consumption74 W (1/8power), 18 W (Idle)Power requirements100 V, 100-120 V, 220-240 V, 110/127/220 V (Brazil), 50/60 HzA/D D/A Converters24 bit 48 kHz SamplingProcessorsHPF: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFFI/O connectorsINPUT1: Combo x1, INPUT2: Combo x 1 RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1 CH2 Mix)Cabinet materialPlywoodFinishDurable Polyurea Painting, BlackHandleSide x2Pole socketF35 mm x2 (Bottom, 0° or -7°)RiggingTop x 2, Rear x 1 (Fit for M10 x 30 - 50 mm Eyebolts)Floor Monitor Angle-Dimensions W305 mm (12.0")H692 mm (27.2") (with rubber feet)D405 mm (15.9")Net weight24.0 kg (52.9 lbs)
